Air Conditioning Services: Heating Ventilation and Air Conditioning

This Blog was posted by Smithson Valley Services Air Conditioning. We serve the Texas Hill Country, including Blanco | Bulverde | Canyon Lake | Fisher | Kendalia | New Braunfels | North San Antonio | Sattler | Sisterdale | Smithson Valley | Spring Branch | Startzville

What Do HVAC Technicians Do?

Before even mulling over any HVAC training, you must familiarize yourself with the general responsibilities of an HVAC technician. HVAC technicians are the individuals behind the acts that offer the environmental comforts everybody loves in their properties, offices, specifically any inside structure. They have the training and knowledge to install and control heat and air conditioning ventilation systems that the majority of persons today usually take for granted. HVAC technicians might well opt for specializing in one of the sub-specialties of the work.

HVAC Technicians do routine care on heating systems throughout the summer. During this period, HVAC technicians also examine that the cooling structures are executing competently, fans are operating properly, refrigerants are not seeping from the system, and condensers and evaporators are operating efficiently. During the winter period, technicians identify cases with heating structures and do routine cleaning to avert obstructions.

Throughout winter, technicians identify issues with heating systems and carry out routine cleaning to avoid obstructions leading to dangerous carbon monoxide quantities. They also examine for destruction on thermocouples, regulate flame levels, confirm carbon monoxide quantities, examine for gas seepages, and verify that the warming system is performing at maximum efficiency. Additionally, each time there is a new structure construction, technicians employ heating and cooling structures, including ductwork and pipes. The configuration and positioning of the ductwork and pipes will be required to be enhanced for the ideal heating and cooling productivity. HVAC technicians are also accountable for checking the systems for vapor carbon monoxide production, refrigerant seepages, and gas seepages before the conclusion of the building.

Significance of HVAC training- HVAC technicians provision complex air conditioning and heating equipment, are open to intense cold and hot temperatures, and occasionally handle refrigerants. Technicians theoretically require working in elevated sites and limited workplaces when replying to a service contact. Technicians constantly are required to stay focused on the work at hand. HVAC training is important to avert injury from electric tools and dangerous substances. In addition, HVAC technicians go through hands-on and classroom training to prepare and service these systems and again reduce the risk related to the work.

Outlooks as HVAC skilled technicians- with the different responsibilities HVAC technicians can perform for many businesses. Most technicians are employed by private plumbing, air conditioning, and heating contractors. The rest technicians are hired by air conditioning and refrigeration services and repair stores, schools, and shops that ship air-conditioning and heating systems.

Read more →

Residential Pest Control – Carpenter Ant Treatments

Carpenter Ant Treatments

Before looking into the different types of carpenter ant treatments available on the market, you need to understand what carpenter ants are doing at their location and why they are there. Whenever most people hear the term carpenter ants, several questions are raised as they are not readily known. Carpenter ants are a special form of ant in the insect kingdom.

Many people are commonly known to compare carpenter ants to termites in many ways. It is common to confuse these insects to be the same as they are both known to damage wood in similar ways. Termites are known to live off wood objects. They are known to eat their way around until all left is an outer shell and a hollow center. Carpenter ants are somewhat different, though.

Carpenter ants are also known to eat at wood objects. However, their reason for eating wood is completely different. Carpenter ants are known to create holes in wooden objects, which act as a habitat where they live. How much they eat will mostly depend on the size of their colony. Carpenter ants mainly look for areas that are moist and cool. As a result, many areas can act as a habitat for carpenter ants in a person’s home.

Because carpenter ants have become quite common in many households, a lot of attention has been put toward different types of carpenter ant treatments that are currently available. The most common form of carpenter ant treatment is to use dust or spray. A solution is usually sprayed in all corners of the house and between furniture areas. Some people also get their outdoor areas sprayed.

To ensure that the external spray used effectively acts as a treatment, some people drill holes in the ground and inject the spray. Carpenter ants are known to dig underground, so this is a good technique to use. However, it is important to remember that using carpenter ant treatments may not be enough to get rid of your ant problems fully.

Many experts that offer carpenter ant treatments services will usually start off by finding the source and preventing them from entering your household in the first place. There are many temporary actions that you can take to make sure that your furniture is not damaged excessively. The common approach would be to re-paint your furniture, which is known to prevent carpenter ants from eating away at the woodwork.

All the tools and equipment needed to be used as carpenter ant treatments can easily be found online. Many online web stores are currently offering a wide variety of sprays to choose from. Certain sprays are known to be more effective than others. For this reason, you must research the spray before buying it.

Read more →

Got A Truck – Get A Travel Trailer

If you already own a truck, you are halfway to having a great RV setup for travel with family and friends. Instead of having to buy both a truck and trailer or a Motorhome, you can pick out a trailer to pull behind your existing truck. Of course, when taking that course of action, you will need to be sure to pick a trailer that falls within the towing capabilities of your truck – otherwise, you will be stuck in the driveway just trying to make it down the street. This plan is only going to work when you get the right trailer weight for the truck, so use the advice in this article to make the right pick. RV lifestyle

What is Gross Vehicle Weight Rating?

This is a number you need to understand before shopping for a truck. The GVWR of your truck is a number that tells you exactly how much weight you can have on your tires when everything is all added up. This number includes the weight of the truck itself, your passengers and gear, and the weight that the trailer presses down on the tongue. When you go out to shop for a trailer, you will find that they have various ‘tongue weights’ that need to be considered. So, do some basic math to add up all of the relevant weights to decide if a specific trailer is going to be suitable for your truck.

Other Important Numbers

GVWR is just one place to start. You will need to know more than just this single number if you are going to pick out the right trailer, so your homework must continue on to a few more points. Specifically, look into information on the points highlighted below –

Gross Combination Weight Rating. As you might guess, this is the rating for everything when it is all added up – including both truck and trailer. Exceeding this rating is a bad idea both for the performance of your vehicle and for your safety out on the road.
Maximum tow rating. This number tells you how much weight you are supposed to be able to tow safely with your truck. Naturally, you will want to be sure that you are selecting a trailer that falls well below your maximum rating, as you need to be able to put things inside the RV for your trips which will add to the weight of the whole rig.

RV parks rockport Tx - coastal breeze

Beware of Marketing Hype

You need to be careful to do some math on your own in order to figure out if you can pull a specific trailer – because the marketing department behind some trucks tends to get a little carried away. You don’t want to rely on a single number that you saw in a commercial that said you could tow a certain amount of weight. Do your own research, and your own math, and conclude that you are comfortable with. Remember, erring on the side of caution is always best, as there is no need to stress your truck harshly while trying to pull an RV for a fun family vacation. Keep everything well within the weight limit and look forward to many great trips to come.

Read more →